Setting up two-step verification | What you can do with "nizima"

Your nizima account allows you to set up two-step verification to prevent unauthorized sign-in.

Two-step verification is a mechanism to prevent unauthorized access by adding SMS verification in addition to the ID / password used for normal sign-in.

If you connect from the same browser, the second and subsequent two-step verifications will be omitted, so the operation with your browser will not be troublesome.

We strongly recommend that you enable two-step verification settings.

Set a phone number

Before setting up two-step verification, first register your phone number in your account settings.

Account Setting

Set up two-step verification

1. Click the changeover switch on the right side of “Two-step verification” and click [Change].

Two-step verification settings are not saved until you click [Change].
After setting up two-step verification, check the recovery code described below and store it in a safe place.

Take a note of the recovery code

1. Click [Display recovery code].

This button cannot be pressed when two-step verification is disabled.

2. After checking, press [☓] on the upper right.

Be sure to keep the recovery code memo in a safe place.
If you press [Regenerate], you will not be able to use the recovery code you wrote down before the regeneration.

Let’s set up two-step verification
right away!

Sign in with two-step verification

If you are already signed in, click Sign Out once to operate in a signed-out state.

1. Open sign-in with two-step verification enabled.

2. Enter the verification code you received with the registered phone number.

It may take a few minutes to receive the SMS.

3. Press [Authenticate].

If you’re having trouble with two-step verification …

Sign in with recovery code

If you lose your mobile phone while registering two-step verification, or if you have no means to receive the verification code, you can use the recovery code that you wrote down when setting up two-step verification.

1. Click “People who do not receive the verification code”.

2. Enter the recovery code you wrote down when setting up two-step verification.

You can use any of the 10 recovery codes, but once you have used the recovery code, you will not be able to use it again.

When the number of recovery codes is reduced, open the recovery code again by following the procedure for taking notes on the recovery code, and click [Regenerate] to regenerate and take notes again.

3. Click [Authenticate].

Cancel two-step verification

1. Click the changeover switch on the right side of “Two-step verification” and click [Change].

Two-step verification settings are not saved until you click [Change].
If you disable and re-enable two-step verification, your recovery code will be regenerated. Be careful not to forget to take notes of the new code.

Please see the [Terms of Service] and feel free to contact us from [Contact Us].